Band saw machines

Manually controlled quick clamping vice, cut is regulated by a hydraulic damper and a restrictor choke valve. A course of a cut is not influenced by a human factor and it causes a higher bladelife. A operator starts a machine pressing button START and sets a cutting speed. After finnishing the cut machines stops itself automatically and an operator lifts the arm manually to the start posittion. Feeding of material is manual. Angle cuts are possible by arm turning.

	mm	0°	45°	60°	-45°	-60°
DS-280M		230	190	120	185	x		0,75/1,1	35/70	2720x27x0,9

A hydraulic semiautomatic band saw machine SHI with a complete hydraulic controll. The machine is equipped by a controll system and by a hydraulic agregate which after the starting a cycle controlls vice clamping, cut, arm lifting to a selected location and vice opening. The arm of machine is pushed towards the cut by a double acting hydraulic cylinder with a possible regulation of a press and rate of flow. Material is manually manipulated. Turning arm for angle cuts.

	mm	0°	45°	60°	-45°	-60°
DS-320SA		300	300	200	270	x	2,4	20-100	3660x27x0,9
DS-500SA		360	360	300	360	300	3,0	20-100	4780x34x1,1
DS-600SA		460	460	320	460	320	4,0	20-100	5380x41x1,3

All working movements of an arm, a vice and feeders are manipulated by a hydraulic agregate. The arm is pushed by towards the cut by a doubleacting hydraulic cylinder. A speed and a force of a working movement are regulated. There is possible to make a lot of feeds. Number of pieces is set in the controlling panel, setting of a lenght is made manually. It is possible to choose an automatic or a semiautomatic regime where all movements are controlled independently. Angle cuts are possible.

	mm	0°	45°	60°	-45°	-60°
300x320 A-CNC-RH		300	290	200	x	x	2,4	20-100	3660x27x0,9
S-320CNC		300	290	200	x	x	2,4	20-100	3660x27x0,9
S-500CNC		360	360	300	x	x	3,0	20-100	4780x34x1,1

SHI / X: Highly productive, semi-automatic dual column band saw machine. The saw is designed for cutting material in both straight and angular cuts, angular cuts adjustable 150° left, 90° perpendicular, 30° right (+/- 60 degrees). The saw is designed for cutting bars of solid material and profiles. Saw is used in series production in industrial plants. The saw is designed for cutting straight bars of steel material.

A-CNC / X-CNC: Highly productive, automatic dual column band saw with multiple material feeding The saw is designed for cutting material in both straight and angular cuts, angular cuts adjustable 150°left, 90°perpendicular, 30°right (+/- 60 degrees). The saw is designed for cutting bars of solid material and profiles. Saw is used in series production in industrial plants. The saw is designed for cutting straight bars of steel material.

	mm	0°	45°	60°	-45°	-60°
DCDS-600SA-A		440	430	290	430	290	4,0	15-150	6060x34x1,1
DCDS-600SA-X		440	430	290	430	290	4,0	15-150	6060 x 34 x 1,1
DCDS-600CNC-A		440	430	290	430	290	4,0	15-150	6060 x 34 x 1,1
DCDS-600CNC-X		440	430	290	430	290	4,0	15-150	6060 x 34 x 1,1
DCDS-750SA-A		540	510	350	510	310	5,5	15-150	6880x41x1,3
DCDS-750SA-X		540	510	350	510	310	5,5	15-150	6880x41x1,3
DCDS-750CNC-A		540	510	350	510	310	5,5	15-150	6880x41x1,3
DCDS-750CNC-X		540	510	350	510	310	5,5	15-150	6880x41x1,3
DCDS-1100SA-X		620	620	500	650	490	5,5	20-100	9000x54x1,6

It is a highly efficient automatic hydraulically controlled band-saw with multiple material feeding.
The band saw machine is designed for cutting in automatic cycle perpendicularly as well as angularly. It enables angle cuts to the right 0 - 60 degrees and left 0-45 degrees. Automatic turning to angular cuts is a pert of cutting.

	mm	0°	45°	60°	-45°	-60°
340 KATANA X-CNC-LR		350	350	230	350	x	3,0	20-100	4780x34x1,1
340 KATANA SERVO		350	350	230	350	x	3,0	20-100	4780x34x1,1

It is a highly efficient automatic hydraulically controlled band-saw with multiple material feed. The machine has massive design, it is robust and has new conception of friendly control system. The blade is sloped 7 degrees to cutting table, which enables better performance during cutting of profiles as well as full materials and enables long lifetime of blade. These parameters together with powerfull drive and blade 34 mm heigh enable high productivity of machine. The machine is designed for vertical cuts. It is suitable for serial production in industrial premises. The machine is designed to saw steel materials, but also non-ferrous and light metals. However, we recommend consulting the manufacturer about this option. No other materials may be sawn without approval from the manufacturer.

	mm	0°	45°	60°	-45°	-60°
TDC-400CNC		400	x	x	x	x		3,0	20-100	4520x34x1,1

X: Semiautomatic, hydraulically manipulated two column band saw machine. An unique construction of the band saw machine with three pulleys for leading of the blade. With the blade that is 8 grades sloped against the level guarantee high-efficiency of cutting. The machine is designed for vertical cuts. Highly efficient machine for cutting of construction steel of profile type. Secondary can be used for hardened material cutting.

X-CNC: Automatic two column band saw machine with complete hydraulic control. The machine is designed for vertical cuts. An unique construction of the band saw machine with three pulleys for leading of the blade. With the blade that is 8 grades sloped against the level guarantee high-efficiency of cutting. Highly efficient machine for cutting of construction steel of profile type. Secondary can be used for hardened material cutting.

	mm	0°	45°	60°	-45°	-60°
TDC-1000SA		1000	x	x	x	x	7,5	20-100	8920x54x1,6
TDC-1000CNC		1000	x	x	x	x	7,5	20-100	8920x54x1,6

Two-column band saw machines for vertical cuts. There is the construction with the pre-tight linear bearings.This rugged machine is suitable for cutting of full materials with the attention to the cutting performance. The hydraulic agregate controlls all working functions of the semiautomatic machine.
CNC= the completely numerically controlled automat with the material feeder with the possibility of setting of several programms for setting of numbers and lenghts of cutted materials.

	mm	0°	45°	60°	-45°	-60°
DC-300CNC		300	x	x	x	x	3,0	20-100	4520x34x1,1
DC-750CNC		700	x	x	x	x	11,0	15-80	7680x67x1,6
DC-1000CNC		850	x	x	x	x	11,0	15-80	9490x67(80)x1,6
DC-1400CNC		1200	x	x	x	x	11,0	15-80	11650x80x1,6

	mm	0°	45°	60°	-45°	-60°
DC-440SA-A		440	x	x	x	x	4,0	15-150	5360 x 34 x 1,1
DC-440SA-X		440	x	x	x	x	4,0	15-150	5360 x 34 x 1,1
DC-440CNC-A		440	x	x	x	x	4,0	15-150	5360 x 34 x 1,1
DC-440CNC-X		440	x	x	x	x	4,0	15-150	5360x34x1,1
DC-444CNC-A		440	x	x	x	x	5,5	15-150	6200 x 41 x 1,3
DC-444CNC-X		440	x	x	x	x	5,5	15-150	6200 x 41 x 1,3
DC-540SA-A		550	x	x	x	x	5,5	15-150	6200 x 41 x 1,3
DC-540SA-X		550	x	x	x	x	5,5	15-150	6200x41x1,3
DC-540CNC-A		550	x	x	x	x	5,5	20-120	6200x41x1,3
DC-540CNC-X		550	x	x	x	x	5,5	15-150	6200x41x1,3
DC-540CNC-A-2M		550	x	x	x	x	5,5	15-150	6200 x 41 x 1,3
DC-540CNC-X-2M		550	x	x	x	x	5,5	15-150	6200x41x1,3

Two-column band saw machines for vertical cuts. There is the construction with the pre-tight linear bearings.This rugged machine is suitable for cutting of full materials with the attention to the cutting performance. The hydraulic agregate controlls all working functions of the semiautomatic machine.
CNC= the completely numerically controlled automat with the material feeder with the possibility of setting of several programms for setting of numbers and lenghts of cutted materials.

	mm	0°	45°	60°	-45°	-60°
DC-450CNC		450	x	x	x	x	9,0	20-150	6830 x 54x1,3
DC-620CNC		550	x	x	x	x	15	15-150	7680x54x1,6

We are here to solve your cutting

JOINT BAND SAW MACHINES

DOUBLE-COLUMN BAND SAW MACHINES FOR ANGULAR CUTTING

DOUBLE-COLUMN BAND SAW MACHINES FOR BUNDLE CUTTING

HIGHLY-EFFICIENT DOUBLE-COLUMN BAND SAW MACHINES