BAND SAW MACHINES

We are here to solve your cutting

JOINT BAND SAW MACHINES

GRAVITATIONAL BAND SAW MACHINE
Joint band saw machines, Gravitational band saw machine

Manually controlled quick clamping vice, cut is regulated by a hydraulic damper and a restrictor choke valve. A course of a cut is not influenced by a human factor and it causes a higher bladelife. A operator starts a machine pressing button START and sets a cutting speed. After finnishing the cut machines stops itself automatically and an operator lifts the arm manually to the start posittion. Feeding of material is manual. Angle cuts are possible by arm turning.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
150x200 GHE-R
Tube 150 110 x x x 0,6/0,8 40/75 2060x20x0,9
220x250 GHE-R
Tube 220 160 90 x x 0,75/1,1 30/65 2450x27x0,9
220x250 GH-R
Tube 220 160 90 x x 0,75/1,1 30/65 2450x27x0,9
230x280 GH-LR
Tube 230 190 120 185 x 0,75/1,1 35/70 2720x27x0,9
230x280 GH-LR-M2V
Tube 230 190 120 185 x 0,9/1,4 35/70 2720x27x0,9
260x280 GH-LR
Tube 255 215 126 195 0,9/1,4 35/70 2970x27x0,9
300x320 GH-LR
Tube 300 300 200 270 x 1,3/1,8 35/70 3660x27x0,9

SEMIAUTOMATIC BAND SAW MACHINE
Joint band saw machines, Semiautomatic band saw machine

A hydraulic semiautomatic band saw machine SHI with a complete hydraulic controll. The machine is equipped by a controll system and by a hydraulic agregate which after the starting a cycle controlls vice clamping, cut, arm lifting to a selected location and vice opening. The arm of machine is pushed towards the cut by a double acting hydraulic cylinder with a possible regulation of a press and rate of flow. Material is manually manipulated. Turning arm for angle cuts.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
230x280 SHI-LR
Tube 230 190 120 185 x 1,5 20-100 2720x27x0,9
260x280 SHI-LR
Tube 255 215 126 195 x 1,5 20-100 2970x27x0,9
300x320 SHI-LR
Tube 300 300 200 270 x 2,4 20-100 3660x27x0,9
360x500 SHI-LR
Tube 360 360 300 360 300 3,0 20-100 4780x34x1,1
460x600 SHI-LR
Tube 460 460 320 460 320 4,0 20-100 5380x41x1,3

AUTOMATIC BAND SAW MACHINE
Joint band saw machines, Automatic band saw machine

All working movements of an arm, a vice and feeders are manipulated by a hydraulic agregate. The arm is pushed by towards the cut by a doubleacting hydraulic cylinder. A speed and a force of a working movement are regulated. There is possible to make a lot of feeds. Number of pieces is set in the controlling panel, setting of a lenght is made manually. It is possible to choose an automatic or a semiautomatic regime where all movements are controlled independently. Angle cuts are possible.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
230x280 A-CNC-R
Tube 230 180 110 x x 1,5 20-100 2720x27x0,9
300x320 A-CNC-RH
Tube 300 290 200 x x 2,4 20-100 3660x27x0,9
300x320 A-CNC-R
Tube 300 290 200 x x 2,4 20-100 3660x27x0,9
360x500 A-CNC-R
Tube 360 360 300 x x 3,0 20-100 4780x34x1,1

DOUBLE-COLUMN BAND SAW MACHINES FOR ANGULAR CUTTING

HORIZONT
Double-column band saw machines for angular cutting, Horizont

SHI / X: Highly productive, semi-automatic dual column band saw machine. The saw is designed for cutting material in both straight and angular cuts, angular cuts adjustable 150° left, 90° perpendicular, 30° right (+/- 60 degrees). The saw is designed for cutting bars of solid material and profiles. Saw is used in series production in industrial plants. The saw is designed for cutting straight bars of steel material.

A-CNC / X-CNC: Highly productive, automatic dual column band saw with multiple material feeding The saw is designed for cutting material in both straight and angular cuts, angular cuts adjustable 150°left, 90°perpendicular, 30°right (+/- 60 degrees). The saw is designed for cutting bars of solid material and profiles. Saw is used in series production in industrial plants. The saw is designed for cutting straight bars of steel material.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
440 HORIZONT SHI
Tube 440 430 290 430 290 4,0 15-150 6060x34x1,1
440 HORIZONT X
Tube 440 430 290 430 290 4,0 15-150 6060 x 34 x 1,1
440 HORIZONT A-CNC
Tube 440 430 290 430 290 4,0 15-150 6060 x 34 x 1,1
440 HORIZONT X-CNC
Tube 440 430 290 430 290 4,0 15-150 6060 x 34 x 1,1
540 HORIZONT SHI
Tube 540 510 350 510 310 5,5 15-150 6880x41x1,3
540 HORIZONT X
Tube 540 510 350 510 310 5,5 15-150 6880x41x1,3
540 HORIZONT A-CNC
Tube 540 510 350 510 310 5,5 15-150 6880x41x1,3
540 HORIZONT X-CNC
Tube 540 510 350 510 310 5,5 15-150 6880x41x1,3
600x1100 HORIZONTAL X
Tube 620 620 500 650 490 5,5 20-100 9000x54x1,6

KATANA
Double-column band saw machines for angular cutting, Katana

It is a highly efficient automatic hydraulically controlled band-saw with multiple material feeding.
The band saw machine is designed for cutting in automatic cycle perpendicularly as well as angularly. It enables angle cuts to the right 0 - 60 degrees and left 0-45 degrees. Automatic turning to angular cuts is a pert of cutting.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
340 KATANA X-CNC-LR
Tube 350 350 230 350 x 3,0 20-100 4780x34x1,1
340 KATANA SERVO
Tube 350 350 230 350 x 3,0 20-100 4780x34x1,1

DOUBLE-COLUMN BAND SAW MACHINES FOR BUNDLE CUTTING

PROFI
Double-column band saw machines for bundle cutting, Profi

It is a highly efficient automatic hydraulically controlled band-saw with multiple material feed. The machine has massive design, it is robust and has new conception of friendly control system. The blade is sloped 7 degrees to cutting table, which enables better performance during cutting of profiles as well as full materials and enables long lifetime of blade. These parameters together with powerfull drive and blade 34 mm heigh enable high productivity of machine. The machine is designed for vertical cuts. It is suitable for serial production in industrial premises. The machine is designed to saw steel materials, but also non-ferrous and light metals. However, we recommend consulting the manufacturer about this option. No other materials may be sawn without approval from the manufacturer.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
400 PROFI A-CNC
Tube 400 x x x x 3,0 20-100 4520x34x1,1

CAMEL
Double-column band saw machines for bundle cutting, Camel

X: Semiautomatic, hydraulically manipulated two column band saw machine. An unique construction of the band saw machine with three pulleys for leading of the blade. With the blade that is 8 grades sloped against the level guarantee high-efficiency of cutting. The machine is designed for vertical cuts. Highly efficient machine for cutting of construction steel of profile type. Secondary can be used for hardened material cutting.

X-CNC: Automatic two column band saw machine with complete hydraulic control. The machine is designed for vertical cuts. An unique construction of the band saw machine with three pulleys for leading of the blade. With the blade that is 8 grades sloped against the level guarantee high-efficiency of cutting. Highly efficient machine for cutting of construction steel of profile type. Secondary can be used for hardened material cutting.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
1000 CAMEL X
Tube 1000 x x x x 7,5 20-100 8920x54x1,6
1000 CAMEL X-CNC-4M
Tube 1000 x x x x 7,5 20-100 8920x54x1,6

HIGHLY-EFFICIENT DOUBLE-COLUMN BAND SAW MACHINES

HERKULES
Highly-efficient double-column band saw machines, Herkules

Two-column band saw machines for vertical cuts. There is the construction with the pre-tight linear bearings.This rugged machine is suitable for cutting of full materials with the attention to the cutting performance. The hydraulic agregate controlls all working functions of the semiautomatic machine.
CNC= the completely numerically controlled automat with the material feeder with the possibility of setting of several programms for setting of numbers and lenghts of cutted materials.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
300x300 HERKULES X-CNC
Tube 300 x x x x 3,0 20-100 4520x34x1,1
700x750 HERKULES X
Tube 700 x x x x 11,0 15-80 7680x67x1,6
700x750 HERKULES X-CNC
Tube 700 x x x x 11,0 15-80 7680x67x1,6
850x1000 HERKULES X
Tube 850 x x x x 11,0 15-80 9490x67(80)1,6
850x1000 HERKULES X-CNC
Tube 850 x x x x 11,0 15-80 9490x67(80)x1,6
1200x1400 HERKULES X
Tube 1200 x x x x 11,0 15-80 11650x80x1,6

CALIBER
Highly-efficient double-column band saw machines, CALIBER
mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
440 CALIBER SHI
Tube 440 x x x x 4,0 15-150 5360 x 34 x 1,1
440 CALIBER X
Tube 440 x x x x 4,0 15-150 5360 x 34 x 1,1
440 CALIBER A-CNC
Tube 440 x x x x 4,0 15-150 5360 x 34 x 1,1
440 CALIBER X-CNC
Tube 440 x x x x 4,0 15-150 5360x34x1,1
444 CALIBER A-CNC
Tube 440 x x x x 5,5 15-150 6200 x 41 x 1,3
444 CALIBER X-CNC
Tube 440 x x x x 5,5 15-150 6200 x 41 x 1,3
540 CALIBER SHI
Tube 550 x x x x 5,5 15-150 6200 x 41 x 1,3
540 CALIBER X
Tube 550 x x x x 5,5 15-150 6200x41x1,3
540 CALIBER A-CNC
Tube 550 x x x x 5,5 20-120 6200x41x1,3
540 CALIBER X-CNC
Tube 550 x x x x 5,5 15-150 6200x41x1,3
540 CALIBER A-CNC-2M
Tube 550 x x x x 5,5 15-150 6200 x 41 x 1,3
540 CALIBER X-CNC-2M
Tube 550 x x x x 5,5 15-150 6200x41x1,3

THOR
Highly-efficient double-column band saw machines, Thor

It is a highly efficient automatic,band-saw with multiple material feed. Bandsaw is designed for performance cutting very hard and tough materials. This bandsaw is using extremely robust construction optimized with target to get maximum rigidity of machine and minimum vibrations. Stroke of frame and feeder stroke is realized by sharpen ball screws. Machine guarantees maximum possible power a precision. The machine is designed for vertical cuts. It is suitable for serial production in industrial premises. The machine is designed to saw steel materials, but also non-ferrous and light metals. However, we recommend consulting the manufacturer about this option. No other materials may be sawn without approval from the manufacturer. Conception of bandsaw is FCV= feeder-cut-main vice. Conception FCV enable cut material in automatic cycle with shortest possible end. Don´t  need to measure and cut ends of bar in semi-automatic cycle.

mm 45° 60° -45° -60° Engine power Blade speed Blade lenght
THOR 4
Tube 450 x x x x 9,0 20-150 6830 x 54x1,3
THOR 5
Tube 550 x x x x 15 15-150 7680x54x1,6

Tech. data NO241 are valid on 1.1.2024. Producer has the right to make changes of technical data.
Values contained on this page are only for information purposes. This information is not an offer and is not a public promise. This indicative offer does not give right to close a contract. The only guiding document for the contract is a valid price list.

Logo